Crushing Machine Specially Designed For Paperboard With Strong Generality, High Productivity
With the rise of the concept of environmental protection, all industries are strengthening the recycling of waste.The method of crushing the waste, then compressing, packing and reprocessing is the mainstream method at present.Especially in the treatment of paper tube, paper core, cardboard and other high recycling value of waste, paper packaging enterprises recognized.
Paper tube mill Introduction:
Paper tube crusher can also be called paper tube crusher.Suitable for all kinds of waste paper, paper, waste carton, cardboard, newspaper, cardboard, cardboard, hard paper, corrugated paper, corner material, scrap material of paper factory and all kinds of waste materials of paper factory, paper making waste, etc.They can be smashed into thinner pieces of paper all at once.
Paper tube crusher Features:
Paper tube crusher is used for paper core tube and corrugated board, which can solve the difficult problem of crushing. After crushing, the cardboard and paper tube are in the shape of broken pieces, instead of traditional blocks. The paper tube after crushing is used for recycling waste goods value, high efficiency, high handling capacity, simple manual operation, and safe and efficient.
Paper tube crusher has the advantages of strong crushing capacity, high output, low noise, suitable for paper tube, paper core, paperboard, books and thick waste paper after manual cleaning, it is difficult to compress and pack materials for crushing, and then enter the packer to compress and pack.
Technical Data:
| Name | Paper tube shredder |
| Model | 2060 |
| Maximum crushing diameter | 20cm |
| Maximum crushing length | 60cm |
| The total power |
16.5kw+2.2kw(dust catcher) |
| cutter diameter | 600mm |
| rotate speed | 560 r/min |
| Dimension(L*W*H) | 3860*1000*1450mm |
| Capacity | 2-3t/h |
| Weight | 1600 kg |
1. Low energy consumption, high output, equipped with brand electrical appliances, ensure the production of equipment without worry.
2. The whole set of equipment remove the knife without wearing parts, simple maintenance, easy to operate!
3. Before the machine leaves the factory, the installation and debugging are completed, and the customer can connect to the electricity for production and rest assured for use.
Machine maintenance
1, bearing
The bearing of the crusher bears all the load of the machine, so good lubrication has a great relationship to the bearing life, it directly affects the machine
Of the service life and rate of operation, thus requiring that the lubricating oil injected must be clean and sealed well,
Main oiling area of this machine
(1) Rotary bearing (2) roll bearing (3) All gears (4) movable bearing, sliding plane.
2, the newly installed tire is prone to loose must be frequently checked.
3. Pay attention to the normal operation of all parts of the machine.
4, pay attention to check the wear degree of easy wear parts, pay attention to replace the worn parts at any time.
Our products are sold all over the world, you can rest assured.
